Manolito Help Files :: How To
This is a collection of answers to common problems that you may experience with Manolito.
How to make Manolito work with Norton Personal Firewall 2002.
Double click the Norton Icon in the bottom right of your screen.
Navigate to the Personal Firewall Section and click on "Internet Access Control"
You will now see a list of programs that are permitted to access the web
Click on "Add"
Locate Manolito.exe (the default location is C:\Program Files\Manolito)
Select it and click "open"
In the pop-up window asking what do you want to do with this application,
click "Permit this application access to the Internet" and then click "OK"
If another pop-up window is displayed bearing the message "Choose Application Category",
select "General" and click "OK"
How to make Manolito work with DI-604 D-Link Router
Open your Browser and go to http://192.168.0.1
Login as administrator
On the Advanced tab page you need to change some settings.
Name: Manolito
Private IP: Your IP address
Protocol type: UDP
Private Port: 41170
Public Port: 41170
Schedule: Always
Click "Apply"
In Manolito go to "Config" and make sure that the Firewall
Port settings are set to "1" and "1"
How to turn off XP Firewall to enable Manolito connection.
Right click on the network connections settings icon in the bottom
right of your screen and left click on "Open Network Connections".
Right click on your current network connection icon and left click
on "Properties".
Left click on the tab marked "Advanced"
Uncheck the "Internet Firewall Protection" box and click "OK"
You will now need to shut down Manolito and restart. You will also need
to close your current Internet connection and re-connect for these changes
to be applied.
How to connect to Manolito using Linux.
iptables-based firewall/router
iptables -A FORWARD -i eth0 -p udp --dport 41170:41350 -j ACCEPT
iptables -A FORWARD -i eth0 -p tcp --dport 41170:41350 -j ACCEPT
iptables -A PREROUTING -i eth0 -t nat -p udp --dport 41170:41350 -j
DNAT --to 190.666.6.6
iptables -A PREROUTING -i eth0 -t nat -p tcp --dport 41170:41350 -j
DNAT --to 190.666.6.6
Change 190.666.6.6 to the address of your machine that is running Manolito.
And change eth0 to the interface connected directly with the Internet.
The first two lines are necessary only if your default FORWARD policy
is something other than ACCEPT.
How to fix "unable to register DLL/OCX: LoadLibrary"
You may receive this following error message when trying to install Manolito:
"Unable to register DLL/OCX: LoadLibrary failed; code 31. A device attached
to the system is not functioning"
You may be able to fix this by updating your browser to the latest version.
How to connect to Manolito through a router.
Go to the site of your router maker. You are usually confronted with a
login screen. Type in the default password given by the maker.
Go to your download or port settings. Select UPD as your transport protocol,
if this is not available choose something that is not TCP/IP, and type in
a port you want to open (for example 41102).
Go to the Manolito "Config" page and retype that port number.
How to configure ZoneAlarm to connect to Manolito.
ZoneAlarm Free Edition
Go to Firewall > Internet Zone Security and change the setting down to "medium"
ZoneAlarm Pro Edition
Go to Firewall > Internet Zone Security and click Custom.
Now scroll down to "Allow Incoming UDP ports".
Select and check this and enter 41170-41350 in the appropriate field.
Select and check "Allow Outgoing UDP ports" and type 1-41350 in the field below.
Click apply and OK.